Hoyt_Picture

Accessories

PW 1.0 Power Supply

PW 1.0 Power Supply

 

The Model PW 1.0 is a regulated 0.5 amp power supply that accepts 24 VAC at the input and provides 24 VDC at the output. The PW 1.0 can be ordered with any output voltage from the 1.5V to 29 VDC. Field voltage adjustments may also be made using only a screwdriver. The power supply is provided with a mounting track for easy field application.These low-cost power supplies feature good regulation and have full overcurrent protection.

 

Models and Sizes

PW 1.0 Power Supply

 

Features

Low cost

Regulated DC output

Snap-track mounted

Screw terminals with pressure plates


HCPW 1.5B Power Supply

HCPW 1.5B Power Supply

 

The Model CPW 1.5B is a regulated 1.5A  power supply that accepts 24 VDC/VAC. Field voltage adjustments may be made using only a screwdriver. The power supply is provided with a mounting track for easy installation.◊ Low cost

 

Models and Sizes

HCPW 1.5B

 

Features

Regulated DC output

Snap-track mounted

Screw terminals with pressure plates


HPW2 Power Supply

HPW2 Power Supply

 

The Model PW 2 converts AC line voltage to regulated DC output. This compact power supply may be used to power various DC operated peripherals and input / output modules on PLC’s, or transmitters in process control.◊ Regulated-power outputs of 5 VDC, 12 VDC and 24 VDC

 

Models and Sizes

HPW2 Power Supply

 

Features

120 V/60Hz input

Screw-terminal connections

Easily mounted in any plane

Output DC voltages are isolated from AC line


WB Series – Water Detector

WB Series – Water Detector

The WB Series is a small, lightweight device that activates and illuminates when water is sensed. Simply place on any flat surface under your equipment or attach using the included mounting brackets. The WB relies on the electrical conductivity of water to change the resistance across two contacts at the base of the enclosure. When the contacts are bridged by water, the resistance changes and triggers an alarm.Choose the WB for applications that require visual alert and/or relay contacts. The WBWO-1 provides a visual alarm and the WBWA-1 unit will trigger both visual and audible alarms when water is sensed. Both units require an external 24VAC/VDC power supply.

 

Models and Sizes

WB Series

 

Features

◊ Visual alarm (WBWO-1)
◊ Visual and audible alarm (WBWA-1)
◊ Small, compact design
◊ DPDT relay
◊ Compact size
◊ Removable mounting bracket

Typical Uses
  • Dishwashers
  • Sinks
  • Toilets
  • Washing machines
  • Water heaters
  • Air conditioners


Meter Terminal Cover Kits

Meter Terminal Cover Kits

Meter terminal cover kits offer protection for your electrical connections. This provides additional safety by preventing accidental contact and insulates against electrical shorting. Available in two sizes which fits nearly every Hoyt meter.

Models and Sizes

P-TERMKIT-COVER-1/4″ = 1/4″ Terminal Cover Kit

P-TERMKIT-COVER-#10 = #10 Terminal Cover Kit

Features

Available in two sizes, #10 and 1/4″

Rugged right angle insulating caps with press in covers (mounting hardware included)

 

 


Transformers

Hoyt offers a variety of Transformers to meet most any need. These products are arranged into 2 Current / Voltage Transformerscategories to expedite your shopping experience.


1000:1 Current Transformer – 0.80″ Window

1000:1 Current Transformer – 0.80″ Window

The 1000:1 or 1000/1 current transformer is used with both analog and digital panel meters up to 100 Amps. The transformer is fully encapsulated and includes standard 18″ leads.

Models and Sizes

Part NumberOutput Ratio to InputCurrent RangeLeads 
Weight: 8 ounces approximate. Consult factory for other options on leads.
P-CT-1000-1011000:1 (100mA Max)
100 Amps18" Leads (18 AWG) with no connectors
P-CT-1000-101-01000:1 (100mA Max)100 Amps18" Leads (18 AWG) with 1/4" insulated female spades

 

Features:

Current Range: 100 Amps
Output Ratio to Input: 1000:1 (100maAC Max)
Frequency Range: 45-60HZ
Dielectric Withstand: 1000VAC (RMS)
Insulation resistance Class: .5KV


Meter Movements

Meter Movements

Completely self-shielded pivot and jewel high torque movement.

 

MODELS AND SIZES:

#19 DC Movement
#22 DC Movement
250 DC Movement
Iron Vane
#17 External Magnet
Taut Band

 

FEATURES:

SELF-SHIELDED ACCU-RING
Now standard in all series of panel meters. This completely self-shielded pivot and jewel high torque movement is constructed with high density sintered iron ring and pole piece which provides the best possible flux distribution through the entire 100 degree swing of the coil. This unique feature coupled with the strong Alnico V Bar magnet offers exceptionally high torque with minimum lag for fast response and quick, accurate readings, spring-loaded jewels are standard for use in rugged applications. Virtually any damping and electrical specifications can be met with a wide variety of bar magnets. Other features include all those listed for the #17 external magnet movement. Hoyt Accu-Ring movement is standard in all panel meter cases. The #22 movement is smaller, less powerful version of the #19 movement. Accuracy of 2% is standard. 1% accuracy is available in most ranges.
EXTERNAL MAGNET #17
These movements, accurate within 2% are built on the D’Arsonval principle according to the best methods of meter manufacture. Features include Alnico V Magnets for high torque movement, soft iron pole pieces electronically bonded to the magnetic system for long life, microscopically inspected and selected jeweled bearings, hardened pivots specially cemented and baked to short-proof anodized coil forms for trouble free life. Stong tubular pointers – either lance or knife edgetypes, ceramic pointer stops, hair springs for quick response and good damping are incorporated into all our movements. Spring loaded jewels are standard with sapphire jewels available as an option.
AC REPULSION
Hoyt AC Repulsion movements are made with an accuracy of 2%. Jeweled bearings, insulated or Bakelite zero adjusters, Hoyt cross arm balance, special constructed viscus damping and choice of lance or knife edge pointers. The Hoyt AC Movements are manufactured with brass movement support to match the moving element. This feature enables the Hoyt AC meter to maintain accurate readings over a wider temperature range. The AC meters can be used with corresponding size DC instruments where matching meters are wanted.
250 DEGREE
The Hoyt once-patented 250 degree meter movement is a self-shielded pivot and spring loaded jewel meter. Built for rugged industrial applications and shock resistant, this movement incorporates precision aligned, mechanically interlocked construction with very high torque. The movement is good down to 200 microamps with ample resistance. Airplane or knife edge pointers are available in different lengths to accommodate a variety of case styles and sizes.


Custom Dials

Custom Dials

Special dials are produced in the Hoyt art and printing departments to exact customer specifications.

 

FEATURES:

Special dials are produced in the Hoyt art and printing departments to exact customer specifications.
 Ten standard Sun-fast colors are offered at an extra charge to cover printing cost only.
 Special colors are available for an additional charge for ink formulation.
 All standard dials are lithographed on hard flat aluminum pans with white backgrounds.


Ellumination

ELumination (Meter Backlighting)

Hoyt’s patent pending Elumination technology provides any Hoyt analog panel meter, including 1.5″, with bright, even backlighting, without the hassles of incandescent bulbs. No hot spots, no shadowing, no heat. No bulbs to burn out and replace. No holes to drill or added mirrors. No more dark control panels. Just bright white, electro-luminescent (EL) light for a clearly visible scale with unmatched readability, functionality, and style. And, Hoyt panel meters with the new lighting technology installed are completely compatible with existing applications! For existing applications, you can easily retrofit the new Hoyt ELuminiation lighting technology into any Hoyt analog panel meter. Standard lighting kits are available for Hoyt 3100 and 5000 series meters; custom kits can be ordered for other style meters.

 

MODELS AND SIZES:

3115-EL – 1-1/2″
3125-EL – 2-1/2″
3135-EL – 3-1/2″
5025-EL – 2-1/2″ 
5035-EL – 3-1/2″

 

FEATURES:

Hoyt ELumination features bright white, even backlighting with no hot spots or shadowing.
Just bright white, electro-luminescent (EL) light for a clearly visible scale with unmatched readability, functionality and style.
And, Hoyt panel meters with the new lighting technology installed are completely compatible with existing applications.


Bezel Mount Meters

Bezel Mount Meters

 

Hoyt has bezel options for most of its lines of  meters. These bezels will vary from plastic to bezel depending on model. All attractively styled to enhance your panel.

 

MODELS & SIZES:

3100 series: 3125/26, 3135/36,3145/46  Black plastic bezels with metal mounting tabs.
2000 series: 2018, 2025/26,2035/36,2045/46 Black bezels, plastic or metal depending on model, includes mounting hardware.
685 series: 685-1, 685-2, 685-3  single, dual, triple stack metal bezel, painted black, with mounting hardware.
250 deg series meters have finish options in either black or chrome. Standard or optional profiles to match other manufacturers available. Bezels available in aluminum, brass, or steel.