Hoyt_Picture

Clamp Meters

Delta 1000A / 400A AC-DC Power Clamp Meter

Delta Power 1000a / 400A AC-DC is specially designed for measurement of AC-DC Power and Power quality parameters.

 

Models and Sizes

Delta 1000A / 400A AC-DC

 

Features

Up to 49th individual harmonics
Non contact voltage detection
LPF mode for VFD
Inbuilt three phase power measurement
Energy measurement
Horse power measurement

 


Delta 1000/300 Clamp Meter

Delta 1000/300 measures inportant electrical parameters like AC current (TRUMS), DC Current, AC Voltage (TRMS) and DC Voltage. It also features Capacitance, Ohm & Continuity, frequency, Duty Cycle and Temperature measurement.

 

Models and Sizes

Delta 1000/300

 

Features

Unique Design
Delta 1000/300 is a highly innovative design for features those increases safety and comfort of user.
Rotating clamp jaws facilitate the measurement at physically awkward positions, vertical bus bars, conductors placed at positions difficult to access.
Location and design of trigger eliminates fatigues caused by single finger operation.


3800 / 3801 / 3810 CL AC/DC Clamp Meter

3800 / 3801 / 3810 CL AC/DC Clamp Meter

 

Models and Sizes

3800 CL
3801 CL
3810 CL

 

Features

Full auto range for V.A and Ω functions.
LCD backlight display.
Flashlight function.
Data hold function freezes the reading in dimly lit or hard to reach
    places.
Low battery indication.
Built-in buzzer for continuity test.
Safety design throughout with no exposed metal parts. Shielded
   banana plugs and recessed input terminals.
Ohm function ideal for checking continuity of relays transformers
   and motor coils.


ALS-1 AC Line Separator

ALS-1 & HLV-1 AC Line Separator

With the aid of the AC line separator, the AC current from any appliance can be determined by plugging the appliance directly into the separator. By doing so, you are able to separate the neutral from hot/live conductor. The advantage of using this separator allows the appliance to remain plugged in, thus providing a constant current and separation of the conductors. (1)×1. which is used for direct reading and. (2)×10. Which is used for actual readings multiplied by factor of 10. The separator also includes a voltage check function. The opening specification is 0.95″×0.95″

 

MODELS AND SIZES:ALS-1 AC Line Separator

HLV-1 Voltage Probe Tester

 

FEATURES:

Designed to proof:
AC voltage detectors,
AC voltage testers
Small and hand held, easy to carry on and use.
Battery operated.
Led indicates when power is “ON”.
Normal 4mm test leads.


3920CL & 3921CL Digital AC Leakage Clamp Meter 200mA

3920CL & 3921CL Digital AC Leakage Clamp Meter 200mA

Designed for AC current and AC voltage. AC testing has 5 ranges. The minimum resolution of leakage current is 0.1mA., Frequency selection: 50/60 Hz and Wide. Data hold function and low battery indication.0-200MAAC, 2/20/200, 1000AAC, up to 600 VAC.

MODELS AND SIZES:

3920 CL Clamp Meter
3921 CL Clamp Meter

 

FEATURES:

Designed for testing AC current and AC voltage.
AC current testing has 5 ranges.
The minimum resolution of leakage current is 0.1mA.
Frequency selection : 50/60 Hz and Wide.
Data hold function.
Maximum reading.
Low battery indication.


2660CL AC/CD Clamp Meter

2660CL AC/CD Clamp Meter

The Model 2660 CL AC-DC digital clamp tester features a 4000- count LCD along with a  full automatic voltage, current, resistor, capacitor measurement, and a frequency counter.  It also has a safety design throughout with no exposed metal parts, shielded banana plugs and recessed input terminals.

 

MODELS AND SIZES:

2660-CL AC/CD Clamp Meter

 

FEATURES:

4000- count LCD.
Full automatic measurement. Voltage measurement. Current measurement. Resistor measurement Frequency counter. Capacitor measurement.
Bar-graph indication.
Range change function.
Data Hold function freezes the reading.
REL function.
Peak function.
VAHz mode measures frequency in ACV and ACA mode.
Diode measurement.
Max/Min function.
Continuity check.
Low battery indication.
Auto Power Off (APO) function.
Safety design throughout with no exposed metal parts, shielded banana plugs and recessed input terminals.
EN 61010-1 CAT III 600V
EN 61326-1