Hoyt_Picture

Control Relays

B8LDE Level Control Relay – Conductive Level Detector/Empty

B8LDE Level Control Relay – Conductive Level Detector/Empty

These LEVEL CONTROLLERS can be used for all types of non-flammable liquids with the use of probes which are generally made of stainless steel. For very corrosive liquids, other more resistant materials are used or for even the most caustic materials, may we suggest having a look at our SC30 and 40 series of detectors featured in our granulates section.

 

MODELS AND SIZES:

B8LDE
B1LCE

 

FEATURES:

Standard (empty)
1 or 2 probe operation
Fixed sensitivity (b8lde)
Adjustable sensitivity (b8lce)
Output relay 8a
Relay indication
8 pin plug-in
11 pin plug-in version (type: b1lde/b1lce)


B8LCR – B1LCR Level Control Relay – Conductive Level Detector

B8LCR – B1LCR Level Control Relay – Conductive Level Detector

These LEVEL CONTROLLERS can be used for all types of non-flammable liquids with the use of probes which are generally made of stainless steel. For very corrosive liquids, other more resistant materials are used or for even the most caustic materials, may we suggest having a look at our SC30 and 40 series of detectors featured in our granulates section.

MODELS AND SIZES:

B8LCR
B1LCR

 

FEATURES:

Selectable pump up or pump down mode
1 or 2 probe operation
Seal leakage detection
Adjustable sensitivity
LED indication
8 pin plug-in
11 pin plug-in version (type b1lcr)


70CVR Control Relay – Under/Over Voltage

70CVR Control Relay – Under/Over Voltage

GENERATOR SET protection relays are used in both manual and automatic transfer panels to monitor components of the generator itself, like the battery, and the quality of energy being supplied.

 

MODELS AND SIZES:

70CVR

 

FEATURES:

Detects under or over voltage condition
Separate adjustment for upper level and lower
Level
Hysteresis – adjustable
Output relay 8a (x 2)
Supply / relay indication
DIN rail mounting


B1UVR – Control Relay – Under/Over Voltage

B1UVR Control Relay – Under/Over Voltage

GENERATOR SET protection relays are used in both manual and automatic transfer panels to monitor components of the generator itself, like the battery, and the quality of energy being supplied.

 

MODELS AND SIZES:

B1UVR
B1OVR

 

FEATURES:

Under voltage (b1uvr)
Over voltage (b1ovr )
Adjustable trip level (ac/dc)
SPDT relay output 8a
LED indication
11-pin plug-in


45UVR & 45OVR – Control Relay

45UVR & 45OVR Control Relay – Under/Over Voltage

GENERATOR SET protection relays are used in both manual and automatic transfer panels to monitor components of the generator itself, like the battery, and the quality of energy being supplied.

 

MODELS AND SIZES:

45UVR
45OVR

 

FEATURES:

Under voltage (45uvr)
over voltage (45ovr)
Adjustable trip level
Hysteresis – adjustable
Output relay 8a
Supply indication
Relay indication
DIN rail mounting


M3MVR Control Relay – Multifunction Voltage

 M3MVR Control Relay – Multifunction Voltage

GENERATOR SET protection relays are used in both manual and automatic transfer panels to monitor components of the generator itself, like the battery, and the quality of energy being supplied.

 

MODELS AND SIZES:

M3MVR

 

FEATURES:

Over or under voltage selectable
Latching facility – selectable
delay from fault – selectable
Hysteresis – selectable
Multi range
Multi voltage


45175 Control Relay – Underspeed

45175 Control Relay – Underspeed

SHAFT ROTATION monitors, frequently called ZERO SPEED or TACHOMETER relays operate when the pulses (usually generated by a proximity switch) received fall below a user selected set point. This situation is sometimes caused by something jamming the machine. The motor(s) draws excessive current thus breaking down the insulation leading to premature failure. At the same time, there could be a buildup of product and other mechanical failures caused. Overload relays react more slowly than zero speed switches thus making the latter a definite asset in the motor starter circuit.

 

MODELS AND SIZES:

45175

 

FEATURES:

Underspeed
Stopping / jamming
Time delay – adjustable
Latching facility – selectable
DIN rail mounting


45TCR Temperature Control Relay

45TCR Temperature Control Relay

PT100 Thermocouple Type:PT100 Max Operating Temperature:50°C Min Temperature Operating:-20°C Voltage, Output Max:250V ac Voltage, Supply Max:230V ac Approval Bodies:CE, CSA, C-tick, cUL, IEC, UL

 

MODELS AND SIZES:

45TCR

 

FEATURES:

Adjustable set point and hysteresis
Relay operation inversion switch – normal/inverted
Analog output (0-10vdc) relative to set point or measured temperature
Dual voltage supply (ac only)
LED indication of relay and supply status
DIN rail or direct mounting