Hoyt_Picture

High Voltage

HHS-175 Hot Sticks

The HHS 175 Telescopic Hot Stick provides maximum flexibility and access for linesman needing to access electrical systems from a working distance. Its unique triangular design allows for easy operation without compromising strength and durability. The HHS-175 has been designed to telescopically extend and retract into itself with integrated locking buttons. All sections are made from high grade electrical rated fiberglass.

 

Models and Sizes:

HHS-175

 

Features:

Triangular-shaped design keeps the sections aligned during extension and retraction.
 Push button release for stick extension and retraction.
 Telescopic design allows for easy assembly, storage and transportation.
 Withstands voltage rating of 100kV from 30cm for 5 minutes.     
 Universal end fitting accepts a wide variety of standard attachments.
 Highly visible  yellow tip section.
 Easy-to-replace sections.
 Carrying bag included. 
 Optional integrated height measurement scale.
 Complies with IEC 62193 safety standard.


287 SVD Personal Safety Voltage Detector

The 287 SVD is compact, easy to wear and convenient in use. Usable both indoor and outdoor.

 

Models and Sizes

287 SVD

 

Features

Voltage detection distance:
    6.6kV(3.8kV phase to ground) : 40cm ± 20%
    11.4kV(6.6kV phase to ground) : 55cm ± 20%
    19.7kV(11.4kV phase to ground) : 80cm ± 20%
    22.8kV(13.2kV phase to ground) : 85cm ± 20%
Water-proof design. (IP65)
Equipped with self-testing functions.
Able to sense all kinds of AC High Voltage System.
Low power consumption.
CE Certified.


HS-800 Short Hot Stick

HS-800 Short Hot Stick

 

Models and Sizes

HS-800

 

Features

Single foamed hot stick.
Universal sunrise fitting on the head to fit
special tool fittings.
Rated at 100 kV per 300mm (5 minutes).
Can be connected to H275 HP HV proximity detector, H21X HVD capacitive HV detector
and H77 HP Non-contact HV detector.
Meets IEC 60855.
Reasonable price.
Accessories


HS-120R Short Hot Stick

HS-120R Short Hot Stick

 

Models and Sizes

HS-120R

Features

Single foamed hot stick.
Universal sunrise fitting on the head to fit
special tool fittings.
Rated at 100 kV per 300mm (5 minutes).
Can be connected to H275 HP HV proximity detector, H21X HVD capacitive HV detector
and H277 HP Non-contact HV detector.
Meets IEC 60855.
Reasonable price.
Accessories


H277 HP Non-Contact H.V. Detector

H277 HP Non-Contact H.V. Detector

 

Models and Sizes

H277 HP

 

Features

2 ranges for selection ( 2 function buttons )
LOW : 50V~1.5kV
Press the LOW button, 277 HP is ready for low voltage detection.
HIGH : 1.5kV~132kV
Press the HIGH button, 277 HP is ready for high voltage detection.
Power consumption:
Off : Less than 5uA
Low voltage detection mode: Less than 40mA
High voltage detection mode: Less than 40mA
Circuit test function
Press the Test button to make sure the whole circuit is working well
before testing actual high voltage circuits.
Optional accessory:
HS-175 Telescopic hot stick (triangle-type)
HS-120 Hot stick


H1026AH Accessories for Hot Sticks and High Voltage Detectors

H1026 AH Accessories for Hot Sticks and High Voltage Detectors

 

Models and Sizes

H1026 AH

 

Features

Content : ADP-HS120 (Fuse extractor head)
                   HOK-166  (Disconnect hook)
                   ADP-278  (Shotgun adapter)
Dimension of the carry case  :  243(L) × 126(W) ×46(D) mm
Weight of the whole set : Approx.  386g


HPD-20 & HPD28A High Voltage Probes

HPD-20 & HPD-28A High Voltage Probes

HPD-20 HPD-20S and HPD-28 are high voltage probes. They measure both AC and DC voltages with your multimeter. They consist of 2 kinds of contact tips, a test clip for the ground , a set of test leads for multimeter and a high qualify enclosure. They enclosure has very good insulation properties. They are light-weight and rugged. 2 kinds of contact tips are available. One is a round special flat spring type for CRT anode. Before taking any measurements, first connect the alligator clip of this probe to earth ground and make sure connection is proper.

 

MODELS AND SIZES:

HPD-20 – 30kV DC, 20kV AC
HPD-28A – 40kV DC, 28kV AC

 

FEATURES:

Meets IEC/EN 61010-1
IEC/EN 61010-2-031


HPC Series Phasing Sticks

HPC Series Phasing Sticks

The HPC range of Multi-function Phasing Sticks utilizes a long established technique to detect and measure High Voltages and perform phasing tests. These Dual Poles instruments incorporates modern, high quality glass fiber front end, composite polyurethane main body molding to give tough and very light weight construction and superior safety features. They have Analog Color Coded Dual Scales and Neon indication. They are not just VDE0681 part 5 compliant and IEC1243-2. They are practical and efficient. Because of their multifunction capabilities, you do not need to buy separates instruments, You can therefore stay within your budget without compromise.

 

MODELS AND SIZES:

HPC7k Phase Stick – Max 9kV
HPC11k Phase Stick – Max 15kV
HPC22k Phase Stick – Max 30kV
HPC33k Phase Stick – Max 40kV
HPC44k Phase Stick – Max 55kV

 

FEATURES:

Designed to Exceeds VDE 0681 part 5.
No user’s assembled parts.
Dual Color Coded Scale (%, Vac).
Neon indicator lit when >1200Vac.
Light weight, Robust & Compact.
Carry Case included.
Compare between Phases.
Measure and test Phase to Earth.
High Quality Fibreglass wound Rod.
Self Powered operation -No Battery-.
DC version available.
Measure Phase to Phase.
Hi immunity to interference fields.
Suitable for indoor and outdoor use.
Current is limited to ±1 milli-ampere
Grounded or Ungrounded systems.
Voltage Color Coded -O-Y-G-B-R.
Factory Test Certificates.
Meets IEC 61481 : 2001


HMDP50K Digital High Voltage Phasing Meter

MDP50K Digital High Voltage Phasing Meter

The newest in Hoyt’s high voltage line, the HMDP-50K Multi-purpose High Voltage Phasing Meter is made for the professional. With a max AC/DC voltage of 50kV it can also notify “in phase” or “out of phase”. It has a sharp 4000-count LCD display which is backlit and auto ranging from 4.000kV to 50.0kV AC and 4.000kV to 50.0kV DC.

 

MODELS AND SIZES

HMDP50K

 

FEATURES

● AC 50kV and DC 50kV measurement with direct reading.
● 4000-count LCD.
● Input impedance : 400 Mohm
● Auto-ranging :
AC : 4.000kV / 40.00kV / 50.0kV
DC : 4.000kV / 40.00kV / 50.0kV
● MDP-50K must be connected with an approved hot stick,
such as HS-175, HS-120.
● Check phases are “in-phase” or “out of phase”.
● Polarity indication : Positive / Negative
● Backlight function.
● Auto power off.
● Power source : 1.5V(AA) alkaline battery × 2.
● Low battery indication(Multi-level).
● Protection class : IP66


H285HD High Voltage Detector

H285HD High Voltage Detector

H285 HD High Voltage Detector is primary used to detect the presence of an alternating field. It shows identification of AC voltages. H285 HD has a large LCD that is housed in an ABS enclosure. H285 HD can be attached to the cable by a large metal clip and can be secured with a cable tie. The high voltage detector senses the radiated magnetic filed surrounding the cable and shows a LIVE warning sign on the LCD.

 

MODELS AND SIZES:

H285 HD High Voltage Detector

FEATURES:

Three different ranges of identification of AC voltage: 
H285-A HD : 3~7 kV 
H285-B HD : 6.6~11 kV 
H285-C HD : 10~22 kV
The LCD will “flash continuously” for high voltage testing.
Physical contact with electrical conductors is not necessary when testing for live wires.
The 285 HD senses the radiated field that surrounds live conductors.
Radiated field strength increases with voltage and decreases quickly with distance.
Large LCD.
Continuous monitoring.
Easy to install.
No batteries required.
Weight: Approx. 80g.
Meets EN 61326-1 
EN 55011 
EN 61000-4-2 
EN 61000-4-3


H276HD & H276SHD High Voltage Detector

H276HD & H276SHD High Voltage Detector

This Model 276 HD detects the presence of voltage in AC lines. An elongate insulation rod permits checking of high tension circuits at safe distance for voltage. The equipment is compact, light weight, and easy to handle, and is also available for voltage detection in low-tension circuits.

 

MODELS AND SIZES:

H276 HD High Voltage Detector – extended shaft
H276 SHD High Voltage Detector – 354-1005mm shaft

 

FEATURES:

Telescopic, compact, light-weight
The length is elastic from 354mm to 1005mm,The
Equipment is light-weight (180g), easy to handle, and handy to carry.
High-voltage detectable
The equipment, whether in stretched state is available for voltage detection in high-tension circuits (3.3kV, 6.6Kv and 24kV) whether the wires involved are naked or insulated.
Low-voltage detectable
The equipment can be used for voltage detection in low-tension circuits (80V ~ 600V) by holding the nameplate portion of the detecting head. Before-use check can easily be done by plugging in an AC 100V plug socket,without using a tester.
Easy to recognize indication
Intermittent lighting in red of a high intensity light-emitting diode and intermittent audible sound of an electronic buzzer are readily recognizable at a full daylight, noisy location.
Waterproof
The detecting head, being tightly enclosed, is free from any trouble due to dust, dirt, water or the like.
Meets EN 61010-1,EN 50081-1, EN 55082-1, EN 55022, EN 61000-4-2, EN 61000-4-3


H2713PU Phasing Stick Proving Unit

H2713PU Phasing Stick Proving Unit

The high voltage proving unit for high voltage testers is utilized to determine if the devices under test are functionally working.  The high voltage proving unit is not a calibrator and can’t be utilized for calibration.  The high voltage proving unit for high voltage testers can be utilized to proof contact devices on a momentary basis (press on, check, release).

 

MODELS AND SIZES:

H2713-PU Phasing Stick Proving Unit

 

FEATURES:

Designed to proof :
phasing sticks.
high voltage detectors (contact type only, not to be used with non contact proximity detectors).
high voltage and voltage testers.
Battery operated.
Led indicates when power is “ON”.
Small and hand held.
Quick connection with normal 4mm test leads.


H230HD and H290HD High Voltage Detector

H230HD and H290HD High Voltage Detector

The detector detects a high and extra high voltage in AC lines. An elongate insulation rod permits checking of high tension circuits at safe distance for voltage. Also it is telescopic compact, light-weight, easy to use and handy.

 

MODELS AND SIZES:

H230 HD High Voltage Detector – 6kV to 36.5kV
H290 HD High Voltage Detector – 6kV to 81.5kV

 

FEATURES:

Telescopic, compact, light-weight.
Light weight easy to use and handy.
High-voltage detectable
The equipment, whether in stretched state is available for voltage detection in high-tension.
Easy to recognize indication
Intermittent lighting in red of a high intensity light emitting diode and intermittent audible sound of an electronic buzzer are easy recognizable at a full daylight, noisy location.
Water proof
The detecting head, being tightly enclosed, is free from any trouble due to dust, water.
IEC / EN 61243-1


H213-H226 HVD High Voltage Detector

H213-H226 HVD High Voltage Detector

This family of Capacitive High Voltage Detectors have been designed to meet the latest IEC standards. Our HVD are self starting and automatically activated when the High Voltage is applied to the contact electrode. They can also be manually armed before use by depressing the “TEST/ARMING” button. These detectors are intended for use on sinusoidal (50 or 60Hz) High Voltage Systems. Models are available to cover systems voltage from 11kV to 132kV.

Our Detectors are utilized to determine if a system is live or not, so that it maybe safely earthed/grounded. All our models are designed for outdoor, but can be utilized indoor and in all wheather condition. This family of capacitive High Voltage Detectors are housed in a rugged, reinforced nylon moulded casing and are shock drop and vibration resistant. Non-standard threshold voltages can be customized to suit applications requirements The HVD have a low battery detection which inhibit manual arming when the battery is too low. The Nylon case is easy to clean and maintain and the HVDs are supplied with the cleaning kit. A visual indication shows when the HVD is armed. When armed, the Green Leds flashes about twice per second. When HV is detected, the Red leds flashes about twice per second and the buzzer also buzz intermittently. A range of accessories is available.

 

MODELS AND SIZES:

H226HVD
H225HVD
H226HVD

 

Dimensions : 300(L) x 100(W) x 100(D)mm

Weight : Approx. 550g(battery included)

 

FEATURES:

Excellent Shock Resistance.
Rugged Nylon moulding.
Auto-ON(when Voltage Detected).
Excellent Drop Resistance.
Good Vibration Resistance.
Loud Sound Alarm Indication.
Built-in Proving and self-test circuit.
High Bright Color Coded LEDS.
Works from normal 9V battery.
Interchangeable Contact Electrode.
Use in All Whether Conditions.
Compatible with all link sticks.
Lightweight, Robust & Compact.
Models available from 11kV to 132kV.
Suitable for indoor and outdoor use.
Self(Auto-ON) or Manual Arming.
Easy access to batteries.
Customized threshold on demand.
Auto-Off(if no voltage detected).
Meets IEC 61243-1
IEC 60068-2-2 
IEC 60068-2-6 
IEC 60068-2-32 
IEC 60529


H288SVD Personal Safety Voltage Detector

H288 SVD Personal Safety Voltage Detector

The Body-Prox H288SVD is a Personal Safety Voltage Proximity Detector. It is a designed to alert the user that they are approaching live equipment where dangerous voltage is present. The Body-Prox tells the user to stay at a safe distance from live equipments, therefore it protect and safeguard people from approaching dangerous Live High Voltage equipment or cable. Live Alert is shown by a ultra bright LED on the front panel and heard via a Buzzer. When Live equipment is detected near the user’s body, the user will be alerted of the PROXIMITY OF LIVE equipment by the AUDIO ALERT (beeping) and the VISUAL ALERT (LED flashing) twice per second.The H288SVD is an ultra low consumption product and can be used for months without replacing the 9V battery. It can be tested by pressing both front panel buttons to proof the tester is working properly. Should the battery become too low, a low battery indication will beep the buzzer and lit the led shortly every 5 seconds. The Body-Prox is water proof and can be used in all weathers. It has no voltage selection and the user does not need to know how to operate complicated test equipment. It is designed to be simple to use. It only require to proof it’s good working condition. This is done by simply depressing the two push buttons situated on the front panel.

 

MODELS AND SIZES:

H288 SVD Personal Safety Voltage Detector

 

FEATURES:

Warning Proximity of AC Voltage (240V~50 kV).
Water Proof.
Easy to wear on Body, Belt.
Ultra High bright LED indication.
High Pitch Sound indication.
Test & Diagnostic Circuitry.
Friendly Priority Alert Reporting.
Circuit Test Function.
High impact type casing.
Different Alerting Sound & Light.
Can be adapted to Sunrise (stick)


H286SVD Personal Safety Voltage Detector

H286 SVD Personal Safety Voltage Detector

H286 SVD is a sensor for sensing AC High Voltage. It provides electric engineering personnel, power engineering personnel, firefighting personnel and instrument equipment workers with prominent warning when approaching high voltage and for taking necessary safety action, preventing illusion and misjudgment which could lead to electric shock to person. When a person wearing H286 SVD is approaching high voltage source or equipment, the sensor will detect automatically and buzzer will generate a “Bi-Bi” short for warning and LED will give flash light to remind operators that the user is approaching a high voltage and special attention shall be given to the safety of operations.

 

MODELS AND SIZES:

H286 SVD Personal Safety Voltage Detector

 

FEATURES:

Compact, easy to wear and convenient in use.
Usable both indoor and outdoor.
Water-proof design.
Equipped with self-testing functions.
Sound and flash light warning of different frequencies varied positively with sensed voltages.
Able to sense all kinds of AC High Voltage System.
Low power consumption.
EN 61326-1