Hoyt_Picture

Personal Safety

287 SVD Personal Safety Voltage Detector

The 287 SVD is compact, easy to wear and convenient in use. Usable both indoor and outdoor.

 

Models and Sizes

287 SVD

 

Features

Voltage detection distance:
    6.6kV(3.8kV phase to ground) : 40cm ± 20%
    11.4kV(6.6kV phase to ground) : 55cm ± 20%
    19.7kV(11.4kV phase to ground) : 80cm ± 20%
    22.8kV(13.2kV phase to ground) : 85cm ± 20%
Water-proof design. (IP65)
Equipped with self-testing functions.
Able to sense all kinds of AC High Voltage System.
Low power consumption.
CE Certified.


HLVD-17 Low Voltage Detector

HLVD-17 Low Voltage Detector

The non-contact Voltage Detector is intended to check for the presence of AC Voltage, signaling the user with an intermittent tone and a flashing LED. They are used to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables or to find a break in a wire.

MODELS AND SIZES:

HLVD-17 Low Voltage Detector – Cat IV 1000V

 

FEATURES:

Designed for non-contact voltage detection. It’s safer.
Microprocessor controlled smart voltage detector.
Bright LED and audible alarm sound when voltage is present.
Sensitivity adjustable with a thumbwheel.
Adjustable for sue on power wiring plus lighting, thermostats and other low voltage circuits.
LED indication for battery condition.
Identify Hot and Neutral.
EN 61010-1 CAT IV 1000V
EN 61326-1


HLVD-15 Low Voltage Detector

HLVD-15 Low Voltage Detector

The non-contact Voltage Detector is intended to check for the presence of AC Voltage, signaling the user with an intermittent tone and a flashing LED. They are used to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables or to find a break in a wire.

 

MODELS AND SIZES:

HLVD-15 Low Voltage Detector – Cat III 600V

 

FEATURES:

Bright LED and audible alarm sound when voltage is present.
Designed for non-contact voltage detection. It’s safer.
Can be used to find a break in a wire.
Flash light function.
ON/OFF switch for longer battery life.
EN 61010-1 CAT III 600V
EN 61326-1


HLV-1 / 2 / 3 Voltage Probe Tester

HLV-1 Voltage Probe Tester

The HLV-1 for AC Voltage Detectors and AC Voltage Testers utilized to determine if the devices under test are functionally working.The HLV-1 is not a calibrator and can not be utilized for calibration. The HLV-1 for AC Voltage Detectors can be proof contact devices on a momentary basis (Press, check, release).

 

MODELS AND SIZES:

HLV1
HLV2
HLV3

ALS-1 AC Line Separator

 

FEATURES:

Designed to proof:
AC voltage detectors,
AC voltage testers
Small and hand held, easy to carry on and use.
Battery operated.
Led indicates when power is “ON”.
Normal 4mm test leads.


H288SVD Personal Safety Voltage Detector

H288 SVD Personal Safety Voltage Detector

The Body-Prox H288SVD is a Personal Safety Voltage Proximity Detector. It is a designed to alert the user that they are approaching live equipment where dangerous voltage is present. The Body-Prox tells the user to stay at a safe distance from live equipments, therefore it protect and safeguard people from approaching dangerous Live High Voltage equipment or cable. Live Alert is shown by a ultra bright LED on the front panel and heard via a Buzzer. When Live equipment is detected near the user’s body, the user will be alerted of the PROXIMITY OF LIVE equipment by the AUDIO ALERT (beeping) and the VISUAL ALERT (LED flashing) twice per second.The H288SVD is an ultra low consumption product and can be used for months without replacing the 9V battery. It can be tested by pressing both front panel buttons to proof the tester is working properly. Should the battery become too low, a low battery indication will beep the buzzer and lit the led shortly every 5 seconds. The Body-Prox is water proof and can be used in all weathers. It has no voltage selection and the user does not need to know how to operate complicated test equipment. It is designed to be simple to use. It only require to proof it’s good working condition. This is done by simply depressing the two push buttons situated on the front panel.

 

MODELS AND SIZES:

H288 SVD Personal Safety Voltage Detector

 

FEATURES:

Warning Proximity of AC Voltage (240V~50 kV).
Water Proof.
Easy to wear on Body, Belt.
Ultra High bright LED indication.
High Pitch Sound indication.
Test & Diagnostic Circuitry.
Friendly Priority Alert Reporting.
Circuit Test Function.
High impact type casing.
Different Alerting Sound & Light.
Can be adapted to Sunrise (stick)


H286SVD Personal Safety Voltage Detector

H286 SVD Personal Safety Voltage Detector

H286 SVD is a sensor for sensing AC High Voltage. It provides electric engineering personnel, power engineering personnel, firefighting personnel and instrument equipment workers with prominent warning when approaching high voltage and for taking necessary safety action, preventing illusion and misjudgment which could lead to electric shock to person. When a person wearing H286 SVD is approaching high voltage source or equipment, the sensor will detect automatically and buzzer will generate a “Bi-Bi” short for warning and LED will give flash light to remind operators that the user is approaching a high voltage and special attention shall be given to the safety of operations.

 

MODELS AND SIZES:

H286 SVD Personal Safety Voltage Detector

 

FEATURES:

Compact, easy to wear and convenient in use.
Usable both indoor and outdoor.
Water-proof design.
Equipped with self-testing functions.
Sound and flash light warning of different frequencies varied positively with sensed voltages.
Able to sense all kinds of AC High Voltage System.
Low power consumption.
EN 61326-1