Hoyt_Picture

Resistance Transducer

M100-TAP – 1-50k Ohms Transducer

M100-TAP – 1-50k Ohms Transducer

The M100-TAP measures the value of resistance on tap position changers, typically used on high voltage transformers. Each position on the selector has an equal value of resistance so that as the tap position is increased or decreased the value of resistance increases or decrease respectively. The M100-TAP measure the value of this resistance and provides an output proportional to the value of the number of taps selected. The M100-TAP can also be used to measure variable resistance 2 or 3 wire systems.

MODELS AND SIZES:

M100-TAP

 

FEATURES:

Non standard inputs / outputs only as far as technically acceptable.
A.C. Auxiliary in range 57.7 to 450 volts
Calibration at temperature other than 23°C


M100-RPN – Resistance Measurement Transducer

M100-RPN – Resistance Measurement Transducer

The M100-RPN is designed to measure the resistance of 3 wire potentiometers, where the resistance value is proportional to the position of the wiper of the potentiometer. The output value from the M100-RPN is directly proportional to the resistance value at the wiper. A typical application is monitoring remote resistance of potentiometer used in manual valve control.

 

MODELS AND SIZES:

M100-RPN

 

FEATURES:

Non standard inputs / outputs only as far as technically acceptable.
A.C. Auxiliary in range 57.7 to 450V
Calibration at temperature other than 23°C