Hoyt_Picture

Temperature Transducer

P30U Transducer of Temperature & Standard Signals

P30U Transducer of Temperature & Standard Signals

 

Models and Sizes

P30U

 

 


M100-RTD RTD temperature measurement

M100-RTD RTD temperature measurement

 

The M100-RTD monitors the resistance of either 100 Ohm Platinum, or 120 Ohm Nickel. The RTDs resistance increase as the temperature rises, this resistance change is detected by the M100-RTD, which provides an output corresponding to the temperature being measured.
The temperature versus resistance values, are provided by the supplier of the RTD used.
RTD measurement of temperature is used in large transformers and large motors, to ensure winding temperatures do not rise to a level that would damage the winding.

 

Models and Sizes

M100-RTD

Features

2 or 3 wire input
Platinum Pt 100 Ohm RTD min. span 20 Ohms …max. span 200 Ohms
Nickel Ni 120 Ohm RTD min. span 24 Ohms….max. span 240 Ohms


PT602 Configurable Transmitter Ducer

Configurable Transmitter Ducer PT602

The transmitter RISH Ducer PT 602 ( Fig. 1 and 2 ) Converts the input variable-a signal from a resistance thermometer Pt 100- to a temperature linear output signal. The analogue output signal is either an impressed current or superimposed voltage which is processed by other devices for purposes of displaying, recording and / or regulating a constant. Versions are available for two, three or four – wire connection.

 

MODELS AND SIZES:

Configurable Transmitter Ducer PT602

 

FEATURES:

Measuring ranges configurable with DIP switch and potentiometer .
Non – Standard user – specific ranges available .
Red LED’s indicator : an open or short – circuit.
Electric isolation between input & output 2.3 kV and power supply & all other circuits 3.7 kV – Fulfils EN 61 010.
Universal (DC / AC) power supply.
Provision for either snapping the transmitter onto top-hat rails or securing it with screws to a wall or panel.
Housing only 17.5 mm wide (size S17) / low space requirement