2732 IN Analog Insulation Tester (250V, 500V, 1000V)

  • High quality Taut Band movement.
  • Three insulation test voltages(DC): 250V, 500V, 1000V.
  • Two continuity test on "low ohms": 3Ω & 500Ω.
  • Compact and lightweight.
  • AC voltmeter with linear scale up to 600 Vac.
  • 200mA continuity short circuit current.
  • li>1mA test current on insulation test at nominal voltage.
  • Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test.
  • Live warning and display or external voltage presence.
  • Fuse, air gap, crowbar and overload protected.
  • On line battery monitoring shows if battery is ok.
  • Manual zero ohm adjustment.
  • Low battery consumption.
  • Mirror scale.
  • Push and turn locking switch for continuous and hand free testing.
  • Designed for meet international standards.
  • Supplied with high quality test leads.
  • BS 16 edition.


  • Insulation Resistance
    - Test voltage (DC V): 250V, 500V, 1000V.
    - Measuring ranges: 0-100MΩ, 0-200MΩ, 0-400MΩ.
    - Mid-scale value: 1MΩ, 2MΩ, 4MΩ.
    - Scale multiplier: ×1/2, ×1, ×2.
    - Accuracy: ± 5% of indicated value.
    - Output voltage on open circuit: Rated test voltage +10%.
    - Output short circuit current: ≥ 1.0mA.
  • Continuity range: 3Ω, 500Ω.
    - Output short circuit current: ≥200 mA.
    - Accuracy: ± 1.5% of scale length.
  • AC Voltage range: 0-600V.
    - Accuracy: ± 3% of scale length.
  • Voltage warning: Warning light circuit live lit from 90Vdc/70Vac, Buzzer beep from 24V ac/dc.
  • Battery check indicate good batteries from 8Vdc to 10Vdc during a load test of 205mA.
  • Battery OK LED lit from 8Vdc and is operative while testing.
  • Dimensions: 205(L) × 90(W) × 55(D)mm.
  • Weight (battery included): Approx. 550g.
  • Power source: 1.5V (AA) × 6.
  • Safety Standard: EN 61010-1 CAT III 600V. EN 61326-1

Accessories: Instruction manual, Test leads, Batteries, Carry case.