187 MCT LAN Cable Tester & Digital Multimeter

SKU:
187MCT
$338.00

Lan Cable Tester

  • Designed for RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring cable etc.,
  • Can verify cable continuity, open, circuit and miss-wired.
  • The remote receiving unit is available for installed cables far away either on the wall plates or on the patch panels.
  • Auto and manual scan function.
  • Ground wire test.
  • Display: LED indication for wire status.

Digital Multimeter

  • 4000 counts LCD.
  • Full automatic Voltage and Resistor measurement.
  • Range change function.
  • Select function.
  • Data Hold function.
  • Continuity check.
  • Diode measurement.
  • Low battery indication.
  • Input impedance: 10MΩ.
$338.00

Specifications

AC Voltage

  • Range: 400mV / 4V / 40V / 400V / 750V
  • Resolution: 0.1mV / 1mV / 10mV / 100mV / 1V
  • Accuracy: ±(1.0%rdg+5dgt)

DC Voltage

  • Range: 400mV / 4V / 40V / 400V / 1000V
  • Resolution: 0.1mV / 1mV / 10mV / 100mV / 1V
  • Accuracy: ±(0.5%rdg+3dgt)

Resistance Range / Resolution / Accuracy

  • 400Ω / 0.1Ω / ±(1.2%rdg+3dgt)
  • 4kΩ / 1Ω / ±(1.2%rdg+3dgt)
  • 40kΩ / 10Ω / ±(1.2%rdg+3dgt)
  • 400kΩ / 100Ω / ±(1.2%rdg+3dgt)
  • 4MΩ / 1kΩ / ±(1.2%rdg+3dgt)
  • 40MΩ / 10kΩ / ±(2.0%rdg+4dgt)

Continuity Test

  • Range: 400Ω
  • Audible threshold: Less than 25Ω

General

  • Operating temp. & humidity: 0˚~40˚C, 80% Max.
  • Storage temp. & humidity: -10˚~50˚C, 80% Max.
  • Dimensions
    • Master unit: 168(L) x 82(W) x 44(D)mm
    • Remote receiving unit: 74(L) x 30 (W) x 25(D)mm.
  • Weight
    • Master unit (battery included): Approx. 283g.
    • Remote receiving unit: Approx. 30g.
  • Power source
    • LAN cable tester: 9V battery x 1.
    • DMM: 1.5V(AAA) x 2.
  • Safety Standard: EN 61010-1 CAT Ⅲ 600V. EN 61326-1. EN 55011. EN 61000-4-2. EN 61000-4-3.

Accessories: Instruction manual. Test leads Self-test cable. Soft pouch Batteries. Multi-wire testing cables(optional). BNC testing cables(optional).