HLPI-3E Series Loop-powered DC Ammeter

SKU:
HLPI-3E
$130.00

Loop-powered DC Ammeter - low-cost, high-performance replacement for many OEM DPMs.

  • 3 1/2 digits with high-contrast LCD.
  • Optional Red, Green or Amber backlighting.
  • 4-20mA   loop-powered input.
  • User-selectable, displayed engineering units.
  • Resistant to RF and EMI.
  • Snap-in bezel mount eliminates mounting hardware.
$130.00

Specifications

Display

  • Digits: 3 1/2 digits (±1999 counts).
  • Type: 0.45" (11.4 mm) 7 segment high contrast LCD.
  • Backlighting: Optional Red Negative, Green Negative, Amber Negative or Green Positive.
  • Overrange: three lower order digits blank for inputs >1999 & < -1999.
  • Polarity: automatic, “-” displayed.
  • Decimal Points: 3 position, user selectable.
  • Annunciators: °F, °C, PSI, %, user selectable or V, A, KW, PF.

Inputs

  • Ranges: 4 to 20mA DC.
  • Configuration: bipolar, differential.
  • Impedance: 300Ω nominal.

Performance

  • Accuracy: ±(0.1% of fs + 2 count).
  • Conversion Rate: 3 per second.
  • Normal Mode Rejection: >30 dB @ 60 Hz.
  • Common Mode Range: ±1 VDC max.
  • Common Mode Rej.: >86 dB.
  • Adjustments: span (gain) and zero (offset).
  • Warmup: 10 minutes typical.
  • Temperature Coeff.: ±100 ppm per °C typical.

Environment

  • Operating Temperature: 0 to 50 °C.
  • Storage Temperature: -10 to 70 °C.

Power Supply: powered by milliamp control loop.

  • Optional Backlight: 24V DC at 35 mA typical.

Mounting: snap-in bezel mount.

Connection: 2 screw terminal (4 with backlight).

Documentation

Extra Information

Meter Approvals
RoHS
Digital Meter Type
DC Ammeter