ST-3501 Digital Multimeter

SKU:
ST-3501
$162.00
ST-3501 Digital Multimeter
  • Display: 3½ digit liquid crystal display (LCD) with max. reading of 1999.
  • Polarity: Automatic, (-) negative polarity indication.
  • Zero Adjustment: Automatic.
  • Over Range Indication: Highest digit of (1) or (-1) is displayed.
  • Low Battery Indication: The (BAT) is displayed when the battery voltage drops below the operating voltage.
  • Measurement Rate: 3 measurements per second, nominal.
$162.00

Specifications

DC Voltage

  • Range: 200mV / 2V / 20V / 200V / 1000V
  • Resolution: 100μV / 1mV / 10mV / 100mV / 1V
  • Accuracy: ±(0.5%rdg+1dgt)
  • Over voltage Protection:
    • 200mV~2V: 500VDC / 350VAC
    • 20V~1000V: 1200VDC / 800VAC

AC Voltage

  • Range: 200mV / 2V / 20V / 200V / 1000V
  • Resolution: 100μV / 1mV / 10mV / 100mV / 1V
  • Accuracy: 45Hz~400Hz: ±(1.2%rdg+4dgt)
  • Over voltage Protection:
    • 200mV~2V: 500VDC / 350VAC
    • 20V~1000V: 1200VDC / 800VAC

DC Current µA/mA

  • Range: 200μA / 2mA / 20mA / 200mA / 10A
  • Resolution: 100nA / 1μA / 10μA / 100μA / 10mA
  • Accuracy:
    • 200μA~200mA: ±(1.0%rdg+1dgt)
    • 10A: ±(2.0%rdg+3dgt)
  • Over voltage Protection:
    • 200μA~200mA: 325mV max
    • 10A: 700mV max

AC Current µA/mA

  • Range: 200μA / 2mA / 20mA / 200mA / 10A
  • Resolution: 100nA / 1μA / 10μA / 100μA / 10mA
  • Accuracy:
    • 200μA~200mA: ±(1.2%rdg+1dgt)
    • 10A: ±(2.0%rdg+3dgt)
  • Over voltage Protection:
    • 200μA~200mA: 325mV max
    • 10A: 700mV max

Resistance

  • Range: 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ
  • Resolution: 0.1Ω / 1Ω / 10Ω / 100Ω / 1kΩ / 10kΩ
  • Max test current: 3mA / 250μA / 50μA / 5μA / 500nA / 50nA
  • Accuracy:
    • 200Ω: ±(1.0%rdg+3dgt)
    • 2kΩ~2MΩ: ±(0.8%rdg+1dgt)
    • 20MΩ: ±(3.0%rdg+1dgt)
  • Max open circuit voltage:
    • 200Ω: 3.2V
    • 2kΩ~20MΩ: 0.3V

Capacitance

  • Range: 2000pF / 20nF / 200nF / 2uF / 20uF
  • Resolution: 1pF / 10pF / 100pF / 1nF / 10nF
  • Accuracy: ±(3%rdg+10dgt)
  • Over voltage Protection: 500mV 400Hz

Frequency

  • HFE test:
    • Base DC current: 10uA
    • Vce: 2.8 ± 0.4V
    • HFE: 0 to 1000
  • Diode:
    • Test current: 1.0 ± 0.6mA
    • Test voltage: 3.2V max.

General

  • Accuracy specifications at 23 ± 5ºC, less than 75% R. H.
  • Operating Temperature: 0ºC ~ 50ºC, 70% R. H.
  • Storage Temperature: -20ºC ~ 60ºC, 80% R. H.
  • Dimensions: 128(L) × 72(W) × 33(D)mm.
  • Weight: Approx. 200g.
  • Power: Single, 006P 9 volt battery.

Related Products