HLPI-3-XEC Series Loop-powered DC Ammeter

SKU:
HLPI-3
$141.00

Loop-powered DC Ammeter - low-cost, high-performance replacement for many OEM DPMs.

  • User-selectable, displayed engineering units.
  • Resistant to RF and EMI.
  • Gasket and clamp provided for NEMA applications.
  • Mounting: Snap-In bezel panel mounting or clamp and gasket.
  • Connection: 2 screw terminal (4 with backlight).
  • Operating / Storage Range: 0 to 50 °C / -10 to 70 °C.
  • Power Supply: powered by the milliamp control loop.
$141.00

Specifications

Display

  • Type: 3 1/2 digits (±1999 counts), 0.45" (11.4 mm) 7 segment high contrast LCD.
  • Backlighting: Optional Red, Green, Amber or Pos Green.
  • Overrange: three lower order digits blank.
  • Polarity: automatic, “-” displayed.
  • Decimal Points: 3 position, user selectable.
  • Annunciators: °F, °C, PSI, %, user selectable.

Inputs

  • Ranges: 4 to 20mA DC loop-powered input.
  • Configuration: bipolar, differential.
  • Impedance: 390Ω.

Performance

  • Accuracy: ±(0.1% of fs + 2 count).
  • Conversion Rate: 3 per second.
  • Normal Mode Rejection: >30 dB @ 60 Hz.
  • Common Mode Range: ±1 VDC max.
  • Common Mode Rej.: >86 dB.
  • Adjustments: span (gain) and zero (offset).
  • Warmup: 10 minutes typical.
  • Temperature Coeff.: ±100 ppm per °C typical.

Documentation

Extra Information

Meter Approvals
RoHS
Digital Meter Type
DC Ammeter